Comeup Yak 7 Hydraulic Recovery Winch

Yak 7 is available as part of our Tracked Winch solution, standalone, or let us fit for you.

Yak 7

3,200 kg Hydraulic Recovery Winch

  • 7,000 lb hydraulic worm gear winch
  • Powered by an onboard hydraulic pump or PTO
  • Fast and variable recovery speeds for high working rate
  • High efficient and constant-operating torque motor
  • Irreversible single stage worm gear provides instant braking and slip free operation
  • An ergonomic T-handle for rapid wire rope payout
  • Heavy duty roller fairlead with grease zerk fittings
  • EN 14492-1 supported: 10:1 D/d ratio, 2:1 wire rope strength and 1.5d freeboard for severe duty car and commercial recovery
  • Standard Compliance: CE Machinery Directive 2006/42/EC, EN 14492-1:2006 Power Driven Winches and SAE J706

Product Specification

Part number:
PN 681260 (Std. drum)
PN 681266 (Long drum)
Rated line pull:
3,175 kg / 7,000 lb (SAE J706 rating)
3,200 kg (EN 14492-1 rating)
Line speed (at 1st layer of rope) : 5.2 mpm at 40 l/min (17.1 fpm at 10.6 g/min)
Operation pressure: 110 bar / 1,595 psi
Max oil flow: 40 l/min (10.6 g/min)
Hydraulic motor: 48.6 cm3/rev (3.0 in3/rev)
Gear ratio: 1-stage planetary gear 50:1
Winch construction: Aluminum die cast housings with steel drum
Clutch (Freespooling): Worm gear disengaged
Brake: Irreversible worm gear
Rotation of winch: Wire rope shall be under-wound orientation only
Drum barrel diameter: 90 mm (3.5")
Drum flange diameter: 168 mm (6.6”)
Distance between flanges:
160 mm (6.3") - Std. drum
240 mm (9.5") - Long drum
Mounting bolts pattern:
130 x 211 mm (5.1" x 8.3”) - Std. drum
130 x 291 mm (5.1” x 11.5”)  - Long drum
Wire rope recommended:
10 mm x 10.7 m for Std. drum
16.2 m for Long drum
1,960 N/mm2 grade with a minimum breaking strength of 69.8 kN required for EN 14492-1 rating.
3/8" x 57.4' for Std. drum
87.3' for Long drum
EIPS grade with a minimum breaking strength of 15,663 lbf required for SAE J706 rating
Winch weight:
29 kg / 63.9 lb - Std. drum
33 kg / 72.8 lb - Long drum
Gross weight :
33 kg / 72.8 lb  - Std. drum
37 kg / 81.6 lb - Long drum
Box dimension, (L x D x H) :
431 x 386 x 256 mm (17" x 15.2" x 10.1")  - Std.drum
511 x 386 x 256 mm (20.1" x 15.2" x 10.1") -Long drum

Compliant with EN 14492-1 requirements for vehicle recovery winch:
The working coefficient for the first rope layer on the drum shall be at least 2.
The D/d ratio to the center of the rope shall be at least 10 for the drum.

Accessories

Standard Accessories

  • Roller fairlead :
    PN 881479  149 mm throat for Yak 7 Std. drum
    PN 881480   229 mm throat for Yak 7 Long drum

Optional Accessories

  • Cable tensioner:
    PN 881236  for Yak 7 Std. drum
    PN 881237  for Yak 7 Long drum

 

Line Pull and Rope Capacity Line Speed
Layer of Wire Rope Pull by layer,
kg / lb
Total Rope on the Drum, m / ft at 60 l/min
(15.9 g/min),
mpm / fpm
Std. drum Long drum
1st 3,175 / 7,000 4.9 / 16.1 7.4 / 24.3 5.2 / 17.1
2nd 2,646 / 5,833 10.7 / 35.1 16.2 / 53.1 6.2 / 20.3
3rd 2,268 / 5,000 17.5 / 57.4 26.6 / 87.3 7.2 / 23.6

Warning
The winch is not intended to be used in any manner for the movement or lifting of personnel.
The rated line pull shown is based on the first layer of rope on the drum.
The rope winding on the drum shall remain 5 wraps from the drum.